How is the “first door” of rail transit built?
At the recent Jiangsu Science and Technology Awards Conference, Nanjing Connie Electromechanical Co., Ltd. (hereinafter referred to as Connie) and Nanjing Institute of Engineering collaborated on the project “Key Technology Development and Application of High-Speed Train Door System”, which was awarded Jiangsu Science First prize for technology.
At present, more than 80% of the doors on the “Revival” trains are jointly developed by them. From “the first door of the subway” to “the first door of the high-speed rail”, “Connegate” has a global market share of 32% in the rail car door, ranking first in the world for three consecutive years.
A little innovation changes the car door ill
Urban rail transit doors have long relied on imports as an important component. Previously, foreign companies applied for nearly 700 patents in the field of door systems using decades of technical barriers, and built a patent-protected pool that was impenetrable, which led to market monopoly by virtue of technological monopoly.
Domestic rail vehicles are often in full-load operation. Under normal circumstances, the failure of the door must account for about 30% of the vehicle's operating failure. The serious failure of the door will cause the train to stop or even endanger passenger safety.
The train door is also known as the sliding door, mainly because the door has two actions of plugging and pulling. That is, when the door is closed, it is inserted into the door of the vehicle or the outside of the vehicle to close and seal; when the door is opened, when the door is moved away from the door by a certain distance, it can slide inside or outside the vehicle body.
The "closed door" of the sliding door has always been a difficult problem for the train door to overcome. Ordinary sliding doors (doors that connect the pulleys to the pulleys and move on the fixed rails) are easy to install, ensuring that the obstacle detection is normal even when the passengers are crowded. However, the sliding door is different. When the passengers in the compartment are crowded, when the sliding door is closed to the last distance, the door panel must move into the compartment at the same time, and the pressing force is generated on the human body. The door panel is overreacted by the passenger body resistance. , the obstacle detection of the automatic door detection system will be activated, so that the closing action cannot be realized in time.
To this end, Connie's R&D personnel developed a new type of micro-motion sliding door that combines the advantages of sliding door and sliding door. By reducing the sliding distance of the sliding door, the crowded passengers in the vehicle are greatly reduced on the door panel. Human body resistance; changed the force state of the closing process and reduced the lead angle.
The rail transit door system involves many technologies. In addition to the problem of the sliding door, the Connegate system used to be open and closed in the real-time test of the Shanghai Metro vehicle. The project general contractor Siemens asked Connie within 3 months. Solve, otherwise switch to other enterprise products. Either "close" the subway door or sell the company closed. This is a transcendental innovation that has been “forced”.
At that time, Kang Xiang, chief engineer of Connie Electromechanical, associated with the principle of the jack. The opening and closing of the subway door was also realized by the screw rotation to drive the nut linked with the door, but the screw pitch was large and could not achieve self-locking. Only. If the screw pitch is made smaller at the position where the door is closed, it can "lock the door" like a jack. In the end, this "unlocked and closed" invention patent has become the international mainstream technology of today's urban railroad locks, forming a reverse patent restriction on foreign companies.
Today, more than 200,000 sets of Connie subway doors are installed in nearly 100 subway lines in Beijing, Shanghai, Guangzhou, Nanjing, etc., realizing the independent localization of the Chinese subway door system.
Conquering the high-speed rail door "three high and one no"
"In 2007, the high-speed rail 'Harmony' was opened, but the core technology and market of high-speed doors were completely monopolized by foreign companies, and the doors were all imported." Shi Xiang still remembers the situation more than ten years ago.
"The development of high-speed rail train doors has four major difficulties - referred to as 'three high and one no.'" Shi Xiang told reporters that "three high" refers to high aerodynamic load, high cold and strong wind sand, high-intensity electromagnetic interference, "one without" It means that the design theory, test evaluation system and standards of the doors with a speed of up to 350 km are still blank in the world. The research and development team has been engaged in technical research for more than ten years, and the four difficulties of the high-speed door system have been solved one by one.
According to Shi Xiang, the high aerodynamic load brought by the train during high-speed operation will cause the door to seal failure and the door to fall off. In this regard, they invented the door with a new type of motion mechanism and sealing technology, using the body to restrain the balance of the aerodynamic load, to achieve the composite movement of the door, which not only prevents the door from being removed, but also strengthens the safety and air tightness of the door. The door has high sound insulation, lower noise inside the car, less stress fluctuations on the eardrum, and a significant increase in ride comfort.
In the winter, the cold at -40 °C in the north and the strong sand in the western region may cause the door to freeze and the failure of lubricating grease and the increase in door movement. "We skillfully utilized the lubrication function of the material 'graphite', invented the self-lubricating self-lubricating adaptive rolling screw drive and variable lead locking device, which realized the integration of transmission and locking, and solved the door movement caused by high cold. Blocking and strong wind sand cause the problem that fine sand enters the door system and cause increased wear, which improves the reliability and adaptability of the high-iron door." Shi Xiang said.
Finally, “one high” is the high-intensity electromagnetic interference of the EMU, which will cause the reliability of the door communication to decrease, resulting in abnormal opening. For high-intensity electromagnetic interference problems, R&D personnel have developed a new generation of high-security intelligent door controllers and remote intelligent operation and maintenance systems using Ethernet and redundant MVB composite networks and fault diagnosis technology. The door controller is certified by the highest international safety level SIL4 (10-8/h), and the safety level is increased by two orders of magnitude.
In response to “Nothing”, Nanjing Institute of Engineering edited the design monographs “Track Vehicle Door Design System” and “EMUs”, which formed the Chinese standard and established the only door test room and evaluation system in the industry that passed CNAS international certification.
“After a full decade, the doors of the revival’s first EMUs have all used Connie products with completely independent intellectual property rights. The doors on the high-speed rail “Harmony” have gradually been widely replaced by our products.
Related articles
-
JD Industrial's first "smart mobile warehouse" was put into use on the Chuanjiaoluqiao Hanbanan High-speed Railway
Recently, JD Industrial Products launched a new generation of supply chain infrastructure for the industrial industry-smart mobile warehouse. Through the integration of procurement digital technology and infrastructure, JD Industrial Products solves the problems of accurate procurement planning, on-site material acquisition and distribution, and inventory management caused by remote construction sites in the engineering and construction industry, and improves the efficiency of material supply on the construction site. Safeguard the construction progress. The first "smart mobile warehouse" has been put into use in the Hanbanan high-speed railway construction project undertaken by Sichuan Chuanjiao Road and Bridge Co., Ltd.
-
Chengchuang rail transit and precision machinery Maanshan production base project officially signed
On November 6, 2021, the Maanshan production base project for rail transit and precision machinery with an investment of 440 million yuan was officially signed. The investor of the project is Zhejiang Chengchuang Precision Machinery Co., Ltd., a listed company on the New Third Board, which mainly produces precision forging of automotive bearings, precision bearing rings and precision metal stamping parts. Stable suppliers of the world's top eight bearing manufacturers such as Tyn and SKF. The project purchases about 63 acres of industrial land, and specifically researches, develops, produces, sells rubber parts, precision mechanical parts, stamping parts, etc. in the rail transit and automotive fields. It is expected that after all are completed and put into production, the annual sales income can be about 500 million yuan, and the annual tax will be paid. About 25 million yuan.
-
Rail transit investment is 220 billion! "Sichuan Province's "14th Five-Year" Comprehensive Transportation Development Plan" released
On October 29, the "Sichuan Province’s "14th Five-Year" Comprehensive Transportation Development Plan" was officially released. The "Plan" stated that during the "14th Five-Year" period, the investment in comprehensive transportation construction will be over 1.2 trillion yuan, of which 700 billion yuan will be invested in highways and waterways. Yuan, 300 billion yuan for railways, 25 billion yuan for civil aviation, and 220 billion yuan for rail transit.
-
The Shandong section of Zheng-Ji high-speed railway is fully transferred to beam erection construction, and the whole line is expected to open to traffic by the end of 2023
On October 24, the first box girder in the direction of Jinan West Station on the Shandong section of Zheng-Ji high-speed railway was successfully erected in the bid section undertaken by China Railway 10th Bureau, marking the full transfer of the Zheng-Ji high-speed railway's Shandong section to the construction stage of girder erection.
-
Qingdao Rail Transit is moving towards a 500 billion yuan industrial cluster
Qingdao Rail Transit: Towards a 500 billion yuan-level industrial cluster, work hard to build advantageous industrial clusters and build a high-level rail transit industry demonstration zone. Qingdao is the "starting place" of China's high-speed trains. From the first column of "Harmony" to the first column of "Fuxing", this witnessed the rapid improvement of China's rail transit industry from catching up to surpassing through independent innovation.
-
China Railway 12th Bureau has more than 50 hours of continuous operation to win the upper line of Nantongpu Railway
At 21:20 on October 8, after more than 50 hours of full rush repairs by more than 160 rescue workers of China Railway 12th Bureau Group, a cargo train safely passed the Changyuan River Railway Bridge, and Nantongpu was interrupted by heavy rainfall. The up-line of the railway is rushed through.
-
142.4 billion! Major rail transit projects were approved in July (with specific routes)
According to statistics, in July 2021, the latest developments of major subway projects worth about 142.448.8 billion yuan were released, including feasibility study report approval, new operations, and new start-ups, involving about 8 projects. (*There were no new approvals, openings, or starting lines for railway projects in July, and this article does not include railway projects)
-
22.1 billion overseas railway construction orders hit, 10 units of China Railway Construction, China Construction and Power Construction won the bid
Recently, a major overseas railway project with a length of about 551.92km was announced for winning the bid. It is the civil construction project of the newly constructed r
















RCCN WeChat QrCode
Mobile WebSite