Wire harness processing inspection of some of the considerations

Harness in the final inspection of the main test size and conduction through the available tape measure the size of each branch of the harness meets the requirements of the drawings; In addition to the very simple wiring harness, the conduction performance testing should be used to guide Taiwan, it is a priori Set a good test program of computer testing equipment.

1: Before testing, make sure to enter the serial number and name of the testing harness so that when the corresponding wiring harness is connected according to the corresponding jacks, the circuit continuity test can be performed.

2: If the fault can be displayed through the computer display to prompt detection personnel.

3: Design tooling equipment, material box size specifications and all the mounting sheath and accessories number attached to the material box to improve the assembly efficiency.

4: To achieve balance workstations, craft staff must be familiar with each operation and fieldwork man hours, adjust the assembly process at any time.