RCCN WeChat QrCode
Mobile WebSiteWhen processing wire harness products, wire harness processing plants always encounter some troublesome things, such as tin on the wires, or labels that are not attached, which are called unreasonable wire harnesses. If you throw away all these harnesses, the loss is very large.
What should we do if we encounter these problems? Let's listen to the suggestions from the wire processing factory:
1, the wire is stained with tin
When the wire is stained with tin, it may cause the PVC to shrink back. Count the proportion of such a situation. If many of them are like this, there should be problems in the process and timely adjustment of the processing technology. If it is a wire problem, if you need to change the wire in time, you should choose a temperature-resistant PVC. It is not too long to control the tin.
2, labeling is not sticky
If the label is not sticky, it may be oily on the wire harness, or the adhesive of the label itself may be aging. Then, when attaching, do not directly touch the dry rubber surface with the hand, first stick it on a clean metal, then Paste one by one on the line.
3, the tension is not enough after crimping
After the wire and the terminal are pressed together, the tensile test is not passed, and there is a possibility that the crimping range of the terminal and the wire conductor is adapted; the material of the blade and the structure thereof are designed; the material of the terminal and the like. Eliminate the reasons one by one.
4, the terminal takes off the PIN when wearing the plastic case
When the plastic case is worn, the terminal is often removed from the PIN. How do we solve it? In fact, it is only necessary to have a pullback action every time a hole is inserted into the hole to solve the problem.
