Shanghai Richeng Electronics Co. Ltd - ISO9001/IATF16949/ISO/TS22163
Choose Language

Wiring duct,Cable Gland,Cable Tie,Terminals,RCCN

Automotive wiring harness assembly and sealing operations

1, all wiring harness requirements wiring neat, fixed firmly, harness can not have shaking drape, no interference force, not friction damage.
 2, in order to make the wiring harness layout reasonable and beautiful wiring can use a variety of models, the size of the fixed bracket, wiring harness processing to take full account of the various electrical components and plug the specific installation location, at the same time with the body structure of the combination of alignment And the length of the reserved harness.
3, for the body to grow and do not have the wiring harness should be folded plate, plug connector seal protection, and not in the body there is overhanging shaking, carrying force.
 4, the outer sheath of the harness can not appear corrugated tube fracture phenomenon, or must be bandaged processing, including bellows or tape after the tape tie.

5, the main harness and the chassis harness docking, the top of the wiring harness and the main harness docking, chassis harness and engine harness docking, roof harness and rear harness docking, electric harness diagnostic socket must be placed on easy maintenance The place. At the same time a variety of wiring harness connector in the wiring harness bundled fixed to the maintenance personnel to facilitate the operation of the mouth near the maintenance.

1, all wiring harness requirements wiring neat, fixed firmly, harness can not have shaking drape, no interference force, not friction damage.
2, in order to make the wiring harness layout reasonable and beautiful wiring can use a variety of models, the size of the fixed bracket, wiring harness processing to take full account of the various electrical components and plug the specific installation location, at the same time with the body structure of the combination of alignment And the length of the reserved harness.
3, for the body to grow and do not have the wiring harness should be folded plate, plug connector seal protection, and not in the body there is overhanging shaking, carrying force.

4, the outer sheath of the harness can not appear corrugated tube fracture phenomenon, or must be bandaged processing, including bellows or tape after the tape tie.

5, the main harness and the chassis harness docking, the top of the wiring harness and the main harness docking, chassis harness and engine harness docking, roof harness and rear harness docking, electric harness diagnostic socket must be placed on easy maintenance The place. At the same time a variety of wiring harness connector in the wiring harness bundled fixed to the maintenance personnel to facilitate the operation of the mouth near the maintenance.

Related articles

Previous: How to make the wind power industry stronger
Next: The corrugated pipe making material should meet the following conditions
On-line
contact
message
download
Print
WeChat WeChat
Collection
TOP