Shanghai Richeng Electronics Co. Ltd - ISO9001/IATF16949/ISO/TS22163
Choose Language

Wiring duct,Cable Gland,Cable Tie,Terminals,RCCN

Copper terminal connection

Nowadays, the industrial automation production industry has begun to gradually use the copper terminal accessories. Because the copper terminals are wide-ranging and fully functional, they have the incomparable advantages when used as wiring accessories, but how to properly apply the copper terminals to the wire connections and signals. The transmission field is a problem that needs to be considered. The most important thing is to choose which connection method when using copper terminals. Reasonable choice of connection method can make the use of copper terminals more effective. Today, we will introduce several copper terminals. Connection method.

Among them, the most common copper terminal in the connection is soldering, in which soldering is the most, the simple point of soldering is to connect the surface of the terminal and the tin material to produce continuity of metal, so in welding Among the connection methods, the most important is the solderability of the copper terminal. If the copper terminal is excellent in solderability, the soldering connection method can be used, and the effect is very remarkable.

   The second connection method of copper terminals is crimping. The so-called crimping is a technique of compressing and locating copper terminals within a specified requirement. The advantage of crimping is that the metal is dissolved by technology. The flow obtains better mechanical strength and electrical continuity. The connection method of crimping is generally used in places with harsh environments, so that the joint can withstand the influence of some external bad factors, especially in some current applications. The location of the crimping connection is specified as the only connection. The reliable stability of the crimping is also higher than that of the soldering. However, crimping has a fatal disadvantage. The crimping method is The permanent connection method can only be used once, so there is no welding in this way.

   The third connection method of the copper terminal is to wrap. The winding is mainly to wind the wire directly on the contact wrap column by the winding gun and the fixed wrap machine. Generally, the wire is wound, pressed and fixed. Above the contacts, an absolutely hermetic seal is formed. Of course, there are no other connections that are so common because of the connection method, because there are more requirements for the connection of the wire, and the extension of the conductor material has a clear range, which leads to the This method of winding is subject to certain specifications and cannot be used in a wide range.

   The fourth connection method of the copper terminal is the piercing connection. The piercing connection is now a relatively advanced and high-end technology. The current range of use is not very extensive. It is mainly suitable for the connection between some ribbon cables, the main operation. The way is to insert the contact spring of the copper terminal into the insulation layer, and then let the conductor of the cable clamp the copper terminal. This connection method can make the connection line between the copper terminal and the cable more tight, and the operation is also very simple. Convenient, very stable and reliable after operation, why is it not widely popular? In fact, it is the same reason as the wrap. It is also limited in connection. If the connection is required, the tool required for the connection is relatively simple, but the cable with the specified wire gauge must be used.

Among them, the most common copper terminal in the connection is soldering, in which soldering is the most, the simple point of soldering is to connect the surface of the terminal and the tin material to produce continuity of metal, so in welding Among the connection methods, the most important is the solderability of the copper terminal. If the copper terminal is excellent in solderability, the soldering connection method can be used, and the effect is very remarkable.

   The second connection method of copper terminals is crimping. The so-called crimping is a technique of compressing and locating copper terminals within a specified requirement. The advantage of crimping is that the metal is dissolved by technology. The flow obtains better mechanical strength and electrical continuity. The connection method of crimping is generally used in places with harsh environments, so that the joint can withstand the influence of some external bad factors, especially in some current applications. The location of the crimping connection is specified as the only connection. The reliable stability of the crimping is also higher than that of the soldering. However, crimping has a fatal disadvantage. The crimping method is The permanent connection method can only be used once, so there is no welding in this way.

   The third connection method of the copper terminal is to wrap. The winding is mainly to wind the wire directly on the contact wrap column by the winding gun and the fixed wrap machine. Generally, the wire is wound, pressed and fixed. Above the contacts, an absolutely hermetic seal is formed. Of course, there are no other connections that are so common because of the connection method, because there are more requirements for the connection of the wire, and the extension of the conductor material has a clear range, which leads to the This method of winding is subject to certain specifications and cannot be used in a wide range.

   The fourth connection method of the copper terminal is the piercing connection. The piercing connection is now a relatively advanced and high-end technology. The current range of use is not very extensive. It is mainly suitable for the connection between some ribbon cables, the main operation. The way is to insert the contact spring of the copper terminal into the insulation layer, and then let the conductor of the cable clamp the copper terminal. This connection method can make the connection line between the copper terminal and the cable more tight, and the operation is also very simple. Convenient, very stable and reliable after operation, why is it not widely popular? In fact, it is the same reason as the wrap. It is also limited in connection. If the connection is required, the tool required for the connection is relatively simple, but the cable with the specified wire gauge must be used.

Related articles

Previous: Electric car motor
Next: Does large-scale PV wind power affect the safety of German power grids?
On-line
contact
message
download
Print
WeChat WeChat
Collection
TOP