Now the domestic economy is constantly developing, people for the economy, comfort and security requirements continue to increase, the type of electronic products on the car is also increasing, so that its car wiring harness will become increasingly complex , The probability of failure of the product has also increased accordingly.
Automotive wiring harness in the use of the process to have a certain durability and reliability, in the course of the people for the production and wiring harness process more interested in the product in the process of equipment need to make its drawings, to arrange the production of wiring harness Process.
Automotive wiring harness in the process of processing its first station is the opening process, the accuracy of which is directly related to the progress of the entire production, in the course of the use of the initial selection of the wrong, especially the line size is short, so that direct Cause all stations to be reworked.
Automotive wiring harness in the process of making the opening process must be based on the requirements of its drawings to determine the reasonable line of its wire size and the size of the head, the equipment after the opening of the need for crimping process, in use, according to its drawings The required terminal type determines the crimp parameter.
The wiring harness requires an effective production of its crimp operation instructions, which means that there is a need for special requirements on the process documentation to indicate and train the operator. The effective wire in the product needs to pass through the sheath before it can be crimped Need to pre-installed wire and then return from the pre-installed station and then crush.
In order to effectively improve the efficiency of its assembly, in the complex wiring harness should be set pre-installed station, pre-installed process is a direct impact on the efficiency of its total assembly, but also effectively reflects a process The technical level of the staff.