Shanghai Richeng Electronics Co. Ltd - ISO9001/IATF16949/ISO/TS22163
Choose Language

Wiring duct,Cable Gland,Cable Tie,Terminals,RCCN

What are the terminal harness processing techniques?

Terminal harness quality is good or bad, the length of life, have made the terminal harness processing technology and technology, want to make high-quality terminal harness, it must be on each part of the terminal have a full understanding. So what did you know? It is better to follow the Nissan terminal harness processing master together to understand the knowledge of it! The

(The contact portion): The edge of the wiring is connected with the connection of the other side, and the conductive function has an important function as the "core wire pressing grid" of the terminal, and varies depending on the shape and the function of the manufacturer, This part has an important function of whether it can adequately meet the characteristics of electrical characteristics, so that deformation or fouling will make it lose its function and become a fatal cause of the malfunction, so it is highly regarded in operation.

Conductor riveting grating: is an important part of the connection between the terminal and the wire. It is necessary to pay attention to it. The management of the riveting end is based on the method of confirming the end height, the tensile test method and so on, but according to the composition of the wire and the type of the terminal The management of the way there is a difference, so when the line species and work instructions attach great importance and must confirm this part.
Cover the riveting grating: from the outside to apply a certain pressure on the wire, in order to avoid the "conductor riveting grill" within the core wire is not directly damaged, the wire insulation riveting, with a protective effect, if the " "The inner dressing is weak, the cover will easily fall off from the riveting gap, will not be able to buffer the external pressure to produce disconnection, in addition, the bandaged too tight wire will be damaged, and will be broken even if covered The outer diameter is the same line type, there are differences, so it is necessary to carry out sufficient confirmation of the dressing shape.


Slope (bell): when the pressure in the "conductor riveting pressure gate" at the core to reduce the damage, "slope" is essential, if not the slope of the core will not only be damaged, and will lead to disconnection or Will greatly damage the external endurance.
Mosaic: With the plastic shell and the main body into the lock, play the role of locking the terminal, its shape varies due to different manufacturers, many types, because this part is extremely sensitive, so when the operation of high attention , If this part of the deformation, insert the plastic shell and the main body, there will be off and other bad (of course, some terminals do not have card mouth, but it is the terminal itself, the end of the fitting part of the card, such as 110,187 , 250 terminals).


Related articles

Previous: Chinese warships appear in the ocean to make the United States headache
Next: Start early layout early China will affect the pattern of the world's new energy vehicles
On-line
contact
message
download
Print
WeChat WeChat
Collection
TOP