Car wiring harness installation note points

In order to make the car above a variety of wire wiring convenience and neat appearance, so the same route with the braid to wrap it into a bundle, which is called the wiring harness.

Of the time, as long as the line number, it will be installed in its corresponding terminal above it.Different models of the wiring harness is different, and the same model, it is based on the site, the engine and the body and other parts, can also be divided into multiple wiring harness. So when you install the car wiring harness need to pay attention to what?

1, the wiring harness should be in accordance with the relevant provisions, including the direction and location to install, to use in its dedicated location staples, reed or a dedicated line card to be fixed to prevent its loose wear and tear.

2, in the installation of the car wiring harness can not pull too tight, especially in the need to turn the place to pay special attention to the need to bypass the acute angle or through the hole, hole, use a dedicated casing or Rubber to protect, otherwise, easy to damage the wiring harness, resulting in open circuit and short circuit and other failures, there may be serious sparks burning wire harness caused by fire.

3, the connection of each connector must be strong, good contact.